MS-B530S Infant incubator

MS-B530S Infant incubator
Function features:
* Microprocessor based servo controlled temperature system
* Air temperature,skin temperature,humidity,timer and heat power separately displayed by LED
* Alarms functions:
 Power failure;
 Over temperature;
 Temperature deviation;
 Temperature sensor failure;
 Fan failure;
* Silence/reset button for alarms
* Integral timer to record therapy time
* Humidity is adjustable continuously
* >37°C temperature setting
* A keypad lock prevent inadvertent changes the setting
* Trough for pulling and pushing ,which is convenient to add  water and wash 
* Fan with low noise and long life-span
* Temperature deviation and over temperature could be amended in front panel directly
* A second thermal cut-off function for more safety
* Skin temperature sensor failure protect function avoid over temperature
* The infant bed inclination angle is adjustable
* six operating windows,two sides operating windows can be swiveled
* Heater is electrically cut-out if air temperature inside incubator exceed 40°C
* cabinet with three drawers, silence castors 
* Large size and double wall hood
Standard configuration:
 Main body(including the transparent hood,control system,infant bed,water trough),skin temperature sensor,I.V.pole, mattress, cabinet, castors.
Optional parts:
Phototherapy up side unit;
phototherapy from up and down sides;
RS232(485) connector ;
Technical data:
* Power supply : AC 110/220V  60/50Hz
* Power input :  ≤420VA
Operating conditions:
* Environment temperature: 20°C ~30°C
* Environment relative humidity: 30%~75%RH
* Environment air velocity of flow: <0.3m/s
* Air Temperature control range: 25°C ~38°C
* Skin temperature control range:32°C ~38.5°C
* Skin temperature sensor accuracy: +0.3°C
* Temperature fluctuation: +0.5°C
* Uniformity of mattress temperature: ≤0.8°C
* Warm-up time: ≤45min
* Internal noise level: ≤55dB
* Humidity display range:10%-95%RH
* Humidity accuracy: ≤10%RH
* Infant bed tilt angle : +10º
* Mattress size: 67cm(L)×54cm(W)
* Trough capacity: 1200ml
* Air filter:0.5um
Each unit is packed in two wooden crate:
* Size (control unit and cabinet):123×69×106cm
 N.W.:85Kg  G.W.:125Kg
* Hood: 97×62×68CM
 N.W.:15Kg  G.W.:40Kg
Transport and storage:
Environment Temp:-10°C --+70°C
Environment Relative Humidity: ≤80%RH
Atmospheric Pressure: 500~1060Hpa