MS-B520S Infant incubator

MS-B520S Infant incubator
Function features:
* Microprocessor based servo controlled temperature system
* Alarms functions:
 Power failure;
 Over temperature;
 Temperature deviation;
 Temperature sensor failure;
 Fan failure;
* Humidity is adjustable continuously
* A keypad lock prevent inadvertent changes the setting
* Integral timer to record therapy time
* Skin temperature sensor failure protect function avoid over temperature
* Air temperature,skin temperature,timer and heat power separately displayed by LED
* >37°C temperature setting
* Silence/reset button for alarms
* Trough for pulling and pushing ,which is convenient to add  water and wash 
* Fan with low noise and long life-span
* Temperature deviation and over temperature could be amended in front panel directly
* A second thermal cut-off function for more safety
* The infant bed inclination angle is adjustable
* six operating windows,two sides operating windows can be swiveled
* Heater is electrically cut-out if air temperature inside incubator exceed 40°C
Standard configuration
Main body(including the transparent hood,control system,infant bed,water trough),skin temperature sensor,I.V.pole, mattress, cabinet, castors.
Optional parts:
Phototherapy up side unit;
phototherapy from up and down sides;
Infant bed pulled from side door;
Infant bed pulled from side and front door;
Double wall hood
Technical data:
* Power supply : AC 110/220V  60/50Hz
* Power input :  ≤420VA
Operating conditions:
* Environment temperature: 20°C ~30°C
* Environment relative humidity: 30%~75%RH
* Environment air velocity of flow: <0.3m/s
* Air Temperature control range: 25°C ~38°C
* Skin temperature control range:32°C ~38.5°C
* Skin temperature sensor accuracy: +0.3°C
* Temperature fluctuation: +0.5°C
* Uniformity of mattress temperature: ≤0.8°C
* Warm-up time: ≤45min
* Internal noise level: ≤55dB
* Infant bed tilt angle : +10º
* Mattress size: 65cm(L)×37cm(W)
* Trough capacity: 1200ml
* Air filter:0.5um
Each unit is packed in two wooden crate:
*Size (control unit and cabinet):120×70×96cm
 N.W.:80Kg  G.W.:110Kg
* Hood: 97×56×63cm
 N.W.:15Kg  G.W.:40Kg
Transport and storage:
 Environment Temp:-10°C--+70°C
Environment Relative Humidity: ≤80%
Atmospheric Pressure: 500~1060Hpa