MS-B510S Infant incubator

MS-B510S Infant incubator
Function features:
* Microprocessor based servo controlled temperature system
* Temperature displayed by LED
* Alarm functions:
 Power failure;
 Over temperature;
 Temperature deviation;
 Temperature sensor failure;
 Fan failure;   
* >37°C temperature setting
* A keypad lock prevent inadvertent changes the setting
* A second thermal cut-off function for more safety
* Humidity is adjustable in two grade
* Heating power displayed on panel
* The infant bed inclination angle is adjustable
* Trough for pulling and pushing ,which is convenient to add water and wash
* Fan with low noise and long life-span
* Temperature deviation and over temperature could be amended in front panel directly
* Slience/reset button for alarms
* six operating windows,two sides access operating windows can be swiveled
* Support bracket
* Heater is electrically cut-out if air temperature inside incubator exceed 40°C
Standard configuration
Main body(including the transparent hood,
control system,infant bed,water trough),I.V.pole,
mattress, support bracket, castors.
Optional parts:
Phototherapy up side unit;
phototherapy from up and down sides;
Infant bed pulled from side door;
Infant bed pulled from side and front door;
Double wall hood.
Technical data:
Power supply : AC110/220V  60/50Hz
Power input :  ≤420VA
Optional parts:
* Environment temperature: 20°C~30°C
* Environment relative humidity: 30%~75%RH
* Environment air velocity of flow: <0.3m/s
* Air Temperature control range:25°C~38°C
* Temperature fluctuation: +0.5°C
* Uniformity of mattress temperature: ≤0.8°C
* Humidity accuracy: ≤10%RH
* Warm-up time: ≤45min
* Internal noise level: ≤55dB
* Infant bed tilt angle : +10º
* Mattress size: 65cm(L)×37cm(W)
* Trough capacity: 1200ml
* Air filter: 0.5um
Each unit is packed in one wooden crate:
* Size :110×78×86cm
* N.W.:72Kg  G.W.:102Kg
Transport and storage:
Environment Temp:-40°C --+55°C
Environment Relative Humidity: ≤95%
Atmospheric Pressure: 500~1060Hpa